H25030-1S FUSE HOLDER BUSSMANN

H25030-1S FUSE HOLDER BUSSMANN

H25030-1S FUSE HOLDER BUSSMANN – 1-Pole 30A 250V Class H Open-Style Fuse Block

The H25030-1S FUSE HOLDER BUSSMANN (Model H25030-1S) is a heavy-duty, single-pole open-style fuse block manufactured by Eaton’s Bussmann series. Designed specifically for Class H, K5, and R cartridge fuses (up to 30 Amps at 250 VAC/VDC), this open-style power distribution fuse holder provides safe, secure circuit protection across industrial power controls, HVAC equipment, and machinery panelboards.

Built with screw terminals and reinforced fuse clips, the H25030-1S FUSE HOLDER BUSSMANN accepts 18 to 10 AWG copper wiring for easy installation and reliable electrical contact. Its flame-retardant thermoplastic construction offers superior heat dissipation and high insulation strength, while its compact chassis-mount design allows for straightforward backpanel mounting in crowded electrical enclosures.

As shown in the image, the fuse holder features a black thermoplastic chassis with bright yellow safety warning labels marked “BUSS UL LISTED CSA FUSEHOLDER” and “WITHSTAND RATING USE CLASS H FUSE”, along with heavy-gauge nickel-plated clip terminals equipped with combination screw connectors.

Key Features of the H25030-1S FUSE HOLDER BUSSMANN

• Class H & K5 Fuse Compatibility: Engineered to hold standard 2” L x 0.56” Dia (14.3mm x 50.8mm) Class H or Class K5 250 V non-rejection fuses (such as Bussmann NON and REN series).

• High-Clamping Screw Terminals: Equipped with sturdy screw connectors that secure 18 to 10 AWG copper wire directly into reinforced clip terminals.

• Reinforced Fuse Clips: Features spring-reinforced metal fuse clips that maintain constant contact pressure, minimizing voltage drop and preventing overheating from loose fitting fuses.

• Thermoplastic Body Construction: Molded from high-grade, UL 94V-0 flame-retardant thermoplastic for high thermal stability and impact resistance.

• Compact Open-Face Mounting: Open-frame chassis design facilitates easy visual inspection and quick fuse replacement without removing safety covers.

• 10kA Interrupting Rating (SCCR): Rated for short-circuit withstand ratings up to 10kA RMS Symmetrical at 250VAC.

Common Applications and Practical Usage

The rugged electrical design of the H25030-1S FUSE HOLDER BUSSMANN makes it a trusted component across commercial and industrial control applications:

• Industrial Control Panels (ICPs): Provides primary and secondary power branch protection for industrial machinery and control enclosures.

• HVAC Systems & Refrigeration: Widely installed in commercial HVAC control units, compressor circuits, and fan motor supply feeds.

• Power Distribution Boards: Functions as an accessible single-pole branch fuse carrier within low-voltage AC/DC power distribution modules.

• General Machinery Circuit Protection: Used in industrial ovens, pump controllers, and lighting power feeds requiring up to 30A at 250V overcurrent protection.

Technical Specifications

The primary electrical, physical, and hardware parameters for the H25030-1S FUSE HOLDER BUSSMANN are detailed below:

Operating Guidelines and Usage Tips

SAFETY NOTICE: Always disconnect main power and test with a calibrated voltage meter before replacing fuses or servicing terminal connections.

• Wire Termination: Strip conductor ends to recommended lengths and torque terminal screws firmly to maintain low contact resistance.

• Fuse Selection: Ensure the inserted cartridge fuse matches the 250V voltage rating and does not exceed the 30A maximum rating of the holder body.

To review official Class H power fuse block standards and industrial electrical safety codes, consult the National Electrical Manufacturers Association (NEMA) Directory.

To check regional warehouse inventory availability or request commercial quotes for volume electrical fuse blocks, visit the Control Qatar Contact Page.